If a broken auto trans shift cable bushing isn't the problem, a stretched or broken cable might be the cause. Amazing Benefits of Choosing AutoZone For the best shopping experience and the lowest prices on auto trans shift cable bushings on. Ascension Engineering Heritage Park Pl Lakeland, FL The shift cable is detached at each end - at the transmission and at the base of the shifter.
The new cable is routed and the bushings are pressed on, or in the case of a mechanically-connected system, a nut and bolt are tightened to connect the cable to the shift /5. Aug 12, After replacing the shift cable bushing on Toyota corolla.
My automatic transmission will not move forward or Wh - Toyota Corolla question. Aug 29, Remove the rubber bushing by pressing it out with your fingers. 6. Insert the new bushings marked B6FB52 from either side of the end link.
Simply press them into place. 7. Compress and lock the spring on the end link. Re-install by first sliding the end link onto the shifter cable, then sliding the bushings over the pin. Apr 09, On one side of the shifter arm, place the washer and the shifter bushing.
On the other side place the spacer bushing and the other washer.
Thread the bolt through all of this and tighten it up with the nut. Now once the nut is hand tight, keep on tightening with an appropriate spanner. Sooner or later the shifter bushing will pop through.